Jindi Ethernet port 4G full Netcom SMS cat M1806N-NC5
Jindi M1806N-NC5 is a network port 4G full Netcom SMS sending and receiving device, embedded super network port, supporting TCP Client, TCP Server, UDP Client, UDP Server four working modes.
Jindi M1806N-NC5 supports the use of IP+PORT mode, and also supports the use of virtual serial port through software, which solves the problem that the PC software cannot communicate with the networked equipment as a serial port. Automatic connection when the network is disconnected to prevent packet loss caused by power failure and network disconnection. Embedded industrial-grade 4G full Netcom module, supporting the three major operators of China Mobile, China Unicom and China Telecom, compatible with 4G/3G/2G SIM cards, supporting seven modes and eighteen frequency bands, it can truly achieve blind plugging of any SIM card, full Netcom, and the whole network.
When the network is abnormal, the built-in Super Ethernet port can continuously try to re-establish the connection until the network is restored, so there is no need to worry about network disconnection, and the network will be automatically restored without manual intervention. The built-in watchdog function ensures 24-hour stable operation of the equipment without downtime. The purpose of design is to automate and intelligentize everything.
Jindi M1806N-NC5 is mainly used in networked and virtualized environments. Connect HUB, switch, router and other network equipment through network cables, and can access LAN, Internet, docking servers, virtualization servers, private clouds and other intranet or Internet environments.
Main parameters:
| Main parameters: | performance | remark | ||
| minimum | Typical | maximum | ||
| Operating Temperature (掳C) | -20 | 25 | +55 | |
| Storage Temperature (掳C) | -25 | 25 | +85 | |
| Operating Voltage(V) | 5.0 | 5.0 | 16 | 鈮�5.0V can guarantee the output power |
| SMS sending speed | 2 seconds/piece | |||
| Serial baud rate (bps) | 9600锛�19200锛�38400锛�57600锛�115200锛�230400 | The factory default baud rate is 115200bps | ||
| Serial port parameters | None/8/1 | |||
Network Protocols:
| Main parameters: | description | remark |
|
Band |
LTE锛團DD锛塀1/B3/B5/B8 LTE (TDD) B38/B39/B40/B41 WCDMA Band B1/B3/B5/B8 TD-SCDMA B34/B39 GSM/GPRS/EDGETriBand850/900/1800 CDMA2000 1X/EVDO BC0 |
Support mobile, China Unicom, telecom, support foreign use, The device can automatically search for the frequency, which can also be set by AT command |
| Network protocols | IP銆乀CP銆乁DP銆丏HCP銆丏NS銆丠TTP銆丄RP銆両CMP銆乄eb socket | |
| Working mode | TCP Server/TCP Client/UDP Server/UDP Client | Default working mode: TCP Server |
|
How the IP was obtained |
Static IP address, DHCP |
Factory default IP: 192.168.0.7 Default subnet mask: 255.255.255.0 Default gateway: 192.168.0.1 Default local port: 23 |
| data format | Text/PDU | |
| AT Command | Support for standard AT instruction set (Hayes 3GPP TS 27.007 and 27.005) |
Interface parameters:
| Hardware interfaces | description | remark |
| Data interface | RJ45 network port | 10/100Mbps, cross-connect adaptive |
| SIM card interface | 3v/1.8v | |
| Antenna interface | 50惟 characteristic impedance | SMA antenna connector |
| Power connector | 5.5*2.1 round head DC power supply |
Specifications:
| Physical characteristics | description | remark |
| Housing material | metal | DIN rail mounting |
| Dimensions(mm) | 114*55*25 | Accessories are not included |
| Weight (g) | 120 | Accessories are not included |
| fittings | Power adapter, network cable, antenna | |
| 涓昏鍙冩暩(sh霉) | 鎬ц兘 | 鍌欐敞 | |||
| 鏈€灏忓€� | 鍏稿瀷鍊� | 鏈€澶у€� | |||
| 宸ヤ綔婧害锛堚剝锛� | -20 | 25 | +55 | ||
| 瀛樺劜(ch菙)婧害锛堚剝锛� | -25 | 25 | +85 | ||
| 宸ヤ綔闆诲锛圴锛� | 5.0 | 5.0 | 16 | 鈮�5.0v鍙繚璀夎几鍑哄姛鐜� | |
| 涓昏鍙冩暩(sh霉) | 鎻忚堪 | 鍌欐敞 | |||
| 闋绘 |
LTE锛團DD锛塀1/B3/B5/B8 LTE (TDD) B38/B39/B40/B41 WCDMA Band B1/B3/B5/B8 TD-SCDMA B34/B39 GSM/GPRS/EDGETriBand850/900/1800 CDMA2000 1X/EVDO BC0 |
鏀寔绉诲嫊(d貌ng)銆佽伅(li谩n)閫�銆侀浕淇★紝鏀寔鍦ㄥ湅(gu贸)澶栦娇鐢�锛� 瑷�(sh猫)鍌欏彲鑷嫊(d貌ng)鎼滃皨闋荤巼锛屼篃鍙互閫氶亷(gu貌)AT鎸囦护瑷�(sh猫)缃� |
|||
| 缍�(w菐ng)绲�(lu貌)鍗�(xi茅)璀� | IP銆乀CP銆乁DP銆丏HCP銆丏NS銆丠TTP銆丄RP銆両CMP銆乄eb socket | ||||
| 宸ヤ綔妯″紡 | TCP Server/TCP Client/UDP Server/UDP Client | 榛樿獚(r猫n)宸ヤ綔妯″紡锛歍CP Server | |||
| IP 鐛插彇鏂瑰紡 | 闈滄厠(t脿i)IP銆丏HCP |
鍑哄粻榛樿獚(r猫n)IP锛�192.168.0.7 榛樿獚(r猫n)瀛愮恫(w菐ng)鎺╃⒓锛�255.255.255.0 榛樿獚(r猫n)缍�(w菐ng)闂�(gu膩n)锛�192.168.0.1 榛樿獚(r猫n)鏈湴绔彛锛�23 |
|||
| 鏁�(sh霉)鎿�(j霉)鏍煎紡 | 鏂囨湰/PDU | ||||
| AT鎸囦护 | 鏀寔妯�(bi膩o)婧�(zh菙n)AT鎸囦护闆嗭紙Hayes 3GPP TS 27.007鍜� 27.005锛� | ||||
| 鐭俊鐧�(f膩)閫侀€熷害 | 2绉�/姊� | ||||
| 涓插彛娉㈢壒鐜囷紙bps锛� | 9600锛�19200锛�38400锛�57600锛�115200锛�230400 | 鍑哄粻榛樿獚(r猫n)娉㈢壒鐜�115200bps | |||
| 涓插彛鍙冩暩(sh霉) | None/8/1 | ||||
| 纭欢鎺ュ彛 | 鎻忚堪 | 鍌欐敞 | |||
| 鏁�(sh霉)鎿�(j霉)鎺ュ彛 | RJ45缍�(w菐ng)鍙� | 10/100Mbps銆佷氦鍙夌洿閫ｈ嚜閬╂噳(y墨ng) | |||
| SIM鍗℃帴鍙� | 3v/1.8v | ||||
| 澶╃窔鎺ュ彛 | 50惟鐗瑰緛闃绘姉 | SMA 澶╃窔鎺ラ牠 | |||
| 闆绘簮鎺ュ彛 | 5.5*2.1鍦撻牠鐩存祦闆绘簮 | ||||
| 鐗╃悊鐗规€� | 鎻忚堪 | 鍌欐敞 | |||
| 鏉愯唱(zh矛) | 閲戝爆 | DIN 灏�(d菐o)杌屽畨瑁� | |||
| 澶栧舰灏哄锛坢m锛� | 114*55*25 | 涓嶅寘鎷厤浠� | |||
| 閲嶉噺锛坓锛� | 120 | 涓嶅寘鎷厤浠� | |||
| 閰嶄欢 | 闆绘簮閬╅厤鍣紝缍�(w菐ng)绶�锛屽ぉ绶� | ||||
鎸囩ず鐕�
| 鎸囩ず鐕堢媭鎱�(t脿i) | 鐙€鎱�(t脿i)瑾�(shu艒)鏄� |
| 涓嶄寒 | 娌�(m茅i)鏈夐枊(k膩i)姗�(j墨)鎴栨矑(m茅i)鏈変緵闆� |
| 甯镐寒 | 娌�(m茅i)鎻扴IM鍗�锛屼俊铏�(h脿o)涓嶅ソ鎴栨壘涓嶅埌缍�(w菐ng)绲�(lu貌) |
| 蹇杻 | 宸ヤ綔鐙€鎱�(t脿i)锛岀櫦(f膩)鐭俊鎴栨墦闆昏┍ |
淇¤櫉(h脿o)寮�(qi谩ng)寮卞垽鏂�
| AT+CSQ杩斿洖绲�(ji茅)鏋� | 淇¤櫉(h脿o)璩�(zh矛)閲� |
| 14~31 | 鍙互姝ｅ父宸ヤ綔 |
| 0~13 鍜� +99 | 淇¤櫉(h脿o)涓嶅锛屼笉鑳芥甯稿伐浣� |
M1806N-NC5鐓х墖
